PBXes » English » Miscellaneous » Problem chaining ring groups
Print Page | Recommend to Friend | Add Thread to Favorites
Post New Thread Post Reply
Post « Previous Thread | Next Thread »
Premium Account

Registration Date: 10.05.2018
Posts: 22

Problem chaining ring groups Post Reply with Quote Edit/Delete Post Report Post to a Moderator       IP Information Go to the top of this page

Can't understand why its not working, my use case is:
- Inbound route from trunk to ring group (office SIP handsets)
- after 10 seconds if not answered divert to another ring group (mobile phones created as classic extensions)
- if not answered go to voicemail on one of the office handsets

The configuration looks as if it should work, but doesn't call the 2nd ring group. With voicemail on the office phone it goes straight to that. If I turn off vm I get 'it has not been possible to connect' message.

I can ring the 2nd ring group from an office phone at that works fine.

Any ideas?

18.07.2018 18:19 holbrook is offline Search for Posts by holbrook Add holbrook to your Buddy List
Post New Thread Post Reply
Go to:

Powered by Burning Board Lite 1.0.2 © 2001-2004 WoltLab GmbH
English Translation by Satelk