| RE: How to create a www3 account
When I try to create the account I get a response
'Invalid captcha' but I have filled in the form correctly.
Could this be because I used and subsequently deleted the required account name previously ?
Please disregard, created correctly now.
Hi, any SPA1001 tips or PBXes settings to get a mirrored extension working properly ?
I intermittently get an immediate busy / voicemail response (from my primary account shown in the system log) although both primary and secondary account status show the SPA as idle, and the SPA itself shows both extensions idle.
If I take the secondary extension offline then the primary extension works normally.
The Sipgate config shows the trunk connected to both PBXes servers (www1 and www3) correctly.
edit: To answer my own post it seems that pbxes voicemail is not good in this scenario. When 1 line of the SPA1001 rings, the other line appears busy and directs the call to voicemail. Using the DID providers voicemail overcomes this problem but obviously doesn't work on internal (ext to ext) calls.
This post has been edited 3 time(s), it was last edited by tel on 28.09.2010 at 17:22.