PBXes » Search » Search Results
Showing posts 1 to 11 of 11 results
Author Post
Thread: RE: Maximum Channels on a trunk issue
red

Replies: 5
Views: 10419

geschockt RE: Maximum Channels on a trunk issue 31.10.2012 11:54 Forum: Miscellaneous

Dear Sirs,
We also have the same issue but using a Sub Pbx.
If we use a normal trunk everything works fine, but using a Sub Pbx (which should be the same as a trunk as far as I undestood) as first trunk for some dial rules, if the Sub Pbx trunk is busy and we call some numbers inside the same rules we have the same issue: the call does not go trough the second trunk (which is the default route). We hear the message "this call can not be connected as dialed" and the hung up on.
The Sub Pbx trunk is connected to a Spa3102 that acts as a FXO port, with this configuration when we receive or we route some calls trough the PSTN line ( so the line is busy) we cannon call numbers that fall inside the dial rules.
The Sub Pbx is limited to 1 maximum channel.
Could you please check ?

Thanks

Patrick

Thread: RE: Is Pbxes Down Today?
red

Replies: 16
Views: 14568

RE: Is Pbxes Donw Today? 15.10.2012 18:16 Forum: Bugs

it's more or less one week that we are jumping from www1 to www3
they both have problems
hope they solve them as soon as possible because we cannot stand this situtaion anymore

Thread: RE: Is Pbxes Down Today?
red

Replies: 16
Views: 14568

wütend RE: Is Pbxes Donw Today? 14.10.2012 11:01 Forum: Bugs

still not working on www1...
do you think you will be able to fix these big issues in a short timeframe ?

regards

Thread: RE: Is Pbxes Down Today?
red

Replies: 16
Views: 14568

wütend RE: Is Pbxes Donw Today? 13.10.2012 16:57 Forum: Bugs

also www1 does not work properly

Thread: RE: Is Pbxes Down Today?
red

Replies: 16
Views: 14568

RE: Is Pbxes Donw Today? 12.10.2012 14:12 Forum: Bugs

From 2 days we are experiencing a lot of problems.
The extensions disconnect by themselves every now and then and they do not reconnect.

regards

patrick

Thread: no one extension is registering on www3
red

Replies: 0
Views: 3707

no one extension is registering on www3 06.05.2012 08:52 Forum: Bugs

Dear Sirs,
no one sip extension and trunk is registering on www3.
This also happend some days ago in www1
Could you please check and revert to me as soon as possible ?

Kindest regards

Patrick

Thread: forwarding call trough a specific trunk 2
red

Replies: 0
Views: 3160

forwarding call trough a specific trunk 2 17.02.2012 11:04 Forum: Miscellaneous

Hi Diafora,
I exactly did what you suggested me in the other thread:
"The trick is not to restrict the Outbound Route to a specific extension, but to match the number in the Custom Dial Pattern with the number of the Classic extension. This way the outbound call will select the best matched route, and direct the call towards the trunk you have selected"

It does not work at all. Below you will find the log:

Feb 17 11:28:08 VERBOSE[31903] logger.c: -- SIP/redbulco-403-1a68 is ringing
Feb 17 11:28:25 VERBOSE[31903] logger.c: -- Nobody picked up in 18000 ms
Feb 17 11:28:25 VERBOSE[31903] chan_sip.c: Hangup call SIP/redbulco-403-1a68, SIP callid 20bc9a8656ad8bb11b804864280b5a35@188.40.65.170
Feb 17 11:28:25 VERBOSE[31903] logger.c: -- Called 405@from-internal/n
Feb 17 11:28:25 VERBOSE[32437] logger.c: -- Called 003934212XXXXX@from-internal/n
Feb 17 11:28:25 NOTICE[32447] app_dial.c: Unable to create channel of type 'SIP' (cause 3 - No route to destination)

I created a classical extension with number 405 connected to a mobile number, i created an outbound route with custom dial pattern 405.
As you can see in the log it says Unable to create channel of type 'SIP' (cause 3 - No route to destination).
If in the custom dial pattern i put the real mobile number it works. But this is not what I am looking for.
Could you please look into this matter a little bit more deep ?

Thanks for your patience.

Regards

Patrick

Thread: RE: forwarding call trough a specific trunk
red

Replies: 2
Views: 8773

RE: forwarding call trough a specific trunk 12.12.2011 14:46 Forum: Miscellaneous

Hi Diafora,
thank you for the suggestion. I tried a lot of times to accomplish what you suggested but I had no luck. The forwarded calls go trough the generic trunk.
No way to have them diverted trough a specifc trunk.
Is there any other option to obtain what I am looking for ? How can I check if I am doing mistakes ?

Kindest regards

Patrick

Thread: RE: forwarding call trough a specific trunk
red

Replies: 2
Views: 8773

forwarding call trough a specific trunk 22.06.2011 11:08 Forum: Miscellaneous

Dear Sirs,
I would like to set up a forwarding system where the forwarded call goes trough a specific trunk. Is it possible to do without using the dial patterns?
This is the example of what I would need to do:
Inbound call goes to extension 3xx, after 10 seconds (if not answered) the call is forwarded to extension, let's say, 321 (classic extension connected to a mobile number).
The call from 321 has to reach the mobile phone not trough the generic trunk but trough a specific trunk reserved to the 321 extension limiting the specified trunk with an outbound routing.
Is it possible ? It seems not to be because when I reserve the trunk to the extension 321 (with an outbound routing) the call does not reach the number and the line falls down.
Please let me know or please let me know if there is a different way to reach this result (but without using the dial patterns)

Kindest regards

Patrick

Thread: RE: Invoicing ?
red

Replies: 35
Views: 83054

RE: Invoicing ? 12.05.2011 16:23 Forum: Miscellaneous

Dear Sirs,
we are a VAT registered bulgarian company.
We would need the invoices for all the payments we made for our PBX and the ones for our customers.
The paypal receipt it is not enough for us.
What do you need from our side to provide us such invoices ?
Looking forward to hearing from you.

Regards

Thread: RE: Pbxes not working today
red

Replies: 1
Views: 3928

wütend RE: Pbxes not working today 23.04.2011 16:04 Forum: Miscellaneous

For me too. Pbxes is not working at all and I cannot reach www3.pbxes.com.

Showing posts 1 to 11 of 11 results

Powered by Burning Board Lite 1.0.2 © 2001-2004 WoltLab GmbH
English Translation by Satelk